Introduction to 1×8 PLC Splitter
1×8 PLC Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.
1×8 PLC Splitter ABS Box is most commonly used in the PON networks. 1×8 PLC Splitter provides the complete protection for inner optical components and cable, as well as designed for the convenient and reliable installation, but 1×8 PLC Splitter ABS Box volume is relatively large. 1×8 PLC Splitter mainly used for various connection and distribution products (outdoor fiber distribution box) or network cabinets.
Anwendungen
- LAN-, WAN- und Metro-Netzwerke
- Telekommunikationsnetze
- Passive optische Netzwerke
- FTT(X)-Systeme
- CATV
- Mehrwertmodul
1×8 PLC Splitter Specifications
| Konfigurationstyp | 1×8 |
| PLC-Splitter-Typ | ABS Box PLC Splitter |
| Steckertyp | SC/APC |
| Fasertyp | Singlemode G657A1 oder G652D |
| Faserlänge | 1 m oder 1,5 m oder auf Anfrage |
| Paketstil | Blockloses Stahlrohr |
| Betriebsbandbreite | 1260–1650 nm |
| Faserdurchmesser | 0,9 mm |
| Typischer Einfügungsverlust (≤) dB | 10.2 |
| Einfügedämpfung (≤) dB | 10.7 |
| Verlustgleichmäßigkeit (≤) dB | 0.4 |
| Polarisationsabhängiger Verlust (≤) dB | 0.2 |
| Wellenlängenabhängiger Verlust (≤) dB | 0.3 |
| Rückflussdämpfung (≥) dB | 50 |
| Richtwirkung (≥) dB | 55 |
| Temperaturabhängiger Verlust (≤) dB | 0.5 |
FAQs on 1×8 PLC Splitter
No, it doesn’t. Our PLC splitters only support single mode application, and the fiber type is G657A1, if you want multimode splitters, please refer to FBT Coupler Splitters.
