Introduction to Fusion Splice Tray 48 cores
Fusion Splice Tray 48 cores is designed to provide a place to store the fiber cables and splices and prevent them from becoming damaged or being misplaced. Fusion Splice Tray 48 cores is also called as splice enclosure or splice organizer. This Fusion Splice Tray 48 cores does not contain any technical functions, and the design is simple. The importance of Fusion Splice Tray 48 cores for protecting fibers is significant.
Merkmale
- Klares und intelligentes Design
- Einfache Installation
- 48 cores capacity
- Exzellenter Faserschutz
- Robuste Tabletts und Abdeckungen aus spritzgegossenem Kunststoff
- Mittellöcher zur Montage des Tabletts
Anwendung
- Optischer Verteilerrahmen
- Glasfaser-Anschlusskasten und FTTH-Anschlusskasten
Fusion Splice Tray 48 cores Specification
| Fasertyp | Einzelfaser |
| Kapazität | 48 cores |
| Material | Abs |
| Anwendung | Dome Fiber Splice Closure |
| Abmessung (mm) | 85*90*12 |
| Gewicht (g) | 34 |
FAQs on Fusion Splice Tray 48 cores
The incoming cable is brought into the splicing center where the outside jacket of the cable is stripped away. The fibers are then looped completely around the 48 Core Fusion Splice Tray and into a splice holder. Different holders are available for different types of splices. The fibers are then spliced onto the outgoing cable if it is an intermediate point or on to pigtails if it is a termination point. These are also looped completely around the 48 Core Fusion Splice Tray and then fed out of the 48 Core Fusion Splice Tray.
