Introduction to LC UPC Attenuator
LC UPC Attenuators are devices to reduce the optical fiber power by a certain level within the fiber optic network. LC/UPC Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements. This may occur because of a mismatch between the transmitters/receivers (transceivers, media converters), or because the media converters are designed for a much longer distance than for which they are being used. Sometimes LC fiber attenuators are also used for stress testing a network link by incrementally reducing the signal strength (increasing the dB attenuation) until the optical link fails, thus determining the signal’s existing safety margin.
Merkmale
- Environmentally stable
- Einfache Installation
- Maßgeschneiderte Spezifikationen
- Geringe Rückflussdämpfung
- Leicht schalttafelmontierbar
- Kompakte Verpackung
- Fixed attenuation values increments from 1 to 25dB
LC UPC Attenuator Specification
Glasfaseranschluss | LC/UPC |
Steckergeschlecht | Von Mann auf Frau fixiert |
Ferrulentyp | Zirkonkeramik |
Übertragungsmodus | Einspielermodus |
Dämpfung | 1dB-30dB |
Betriebswellenlänge (nm) | 1260~1620(SM) |
Dämpfungsgenauigkeit | ±0,5 dB |
Rückflussdämpfung | ≥45dB |
Polarisationsabhängiger Verlust | ≤0,2 dB |
Maximale optische Eingangsleistung | 200 mW |
Feuchtigkeit | 95%RH |
Betriebstemperaturbereich | -40~80°C |
Lagertemperaturbereich | -40~85°C |