Introduction to Fiber Optic Splitter 1×2
LGX PLC splitters integrate the splitter with an LGX type module,The strong metal body protects the parts and splitters components inside the closure, while there are pre-teminated adapters on the LGX box to connect to outside equipment.
The LGX PLC splitter is small size and robust as well as flexible to use, it works with single mode optical fibers and with multiple adapters options, thus this product can be used stand alone or with fiber optic patch panels.
Características
- Good channel-to-channel Uniformity
- High Polarization Extinction Ratio
- Low Input Polarization Sensitivity, PDL≤0.2dB
- Pérdida dependiente de baja polarización
- Operating bandwidth: 1260- 1650nm
Fiber Optic Splitter 1×2 Specifications
| Tipo de configuración | 1×2 |
| Tipo de divisor PLC | Divisor PLC del módulo LGX |
| tipo de conector | Carolina del Sur/APC |
| Tipo de fibra | Modo único G657A1 o G652D |
| Longitud de la fibra | 1m o 1,5m o Solicitado |
| Estilo del paquete | Tubo de acero sin bloqueo |
| Ancho de banda operativo | 1260~1650nm |
| Diámetro de fibra | 0,9 mm |
| Pérdida de inserción típica (≤) dB | 3.9 |
| Pérdida de inserción (≤) dB | 4.2 |
| Uniformidad de pérdida (≤) dB | 0.4 |
| Pérdida dependiente de la polarización (≤) dB | 0.2 |
| Pérdida dependiente de la longitud de onda (≤) dB | 0.3 |
| Pérdida de retorno (≥) dB | 50 |
| Directividad (≥) dB | 55 |
| Pérdida dependiente de la temperatura (≤) dB | 0.5 |
FAQs on Fiber Optic Splitter 1×2
Passive Optical Splitters are, quite simply, the components that split the fiber and its signal. A signal from the Aggregation Switch is sent along a run of fiber. When it reaches a Passive Optical Splitter, mirrors and glass in the component split the light into two, or three, or more fiber strands.
The way we define it, a coupler (usually) has four ports, uses no “internal” resistors and has one isolated port that is terminated. A splitter is (usually) a three-port, is non-directional, and requires internal resistors (like a Wilkinson) and has no isolated port.
