Introduction to Fiber Patch Cord FC LC
Fiber Patch Cord FC LC assembled with one LC/PC connector and one FC/PC connector. LC to FC Fiber Patch Cable Single Mode simplex is suitable for fast Ethernet, gigabit Ethernet and fiber channel applications, such as in data center, telecom room, server farms, cloud storage networks, and any place fiber jumper cables are needed. Fiber Patch Cord FC LC is ideal for connecting 100/1000BASE-SX transceivers etc. for fast Ethernet, gigabit Ethernet and fiber channel applications.
Fiber Patch Cord FC LC Specifications
| tipo de conector | FC to LC |
| Tipo polaco | UPC a APC |
| Modo de fibra | OS2 9/125 μm |
| Pérdida de inserción | ≤0,3dB |
| Pérdida de retorno | ≥60dB |
| Longitud de onda | 1310/1550nm |
| Grado de fibra | G.652.D |
| Radio de curvatura mínimo | 30mm |
| Atenuación a 1310 nm | 0,36dB/km |
| Atenuación a 1550 nm | 0,22dB/km |
| Recuento de fibras | simplex |
| Diámetro del cable | 2,0 mm |
| Cubierta para cables | CLORURO DE POLIVINILO |
| Polaridad | A(Tx) a B(Rx) |
| Temperatura de funcionamiento | -20~70°C |
| Temperatura de almacenamiento | -40~80°C |
FAQs on Fiber Patch Cord FC LC
¿Cuál es la fuerza de tracción máxima que se puede aplicar durante la instalación del cable estándar?
Thanks for your question. The max pulling force during the cable installation is 70N.
