Introduction to LC Single Mode Attenuator
LC Single Mode Attenuators are devices to reduce the optical fiber power by a certain level within the fiber optic network. LC Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements. This may occur because of a mismatch between the transmitters/receivers (transceivers, media converters), or because the media converters are designed for a much longer distance than for which they are being used. Sometimes LC/UPC attenuators are also used for stress testing a network link by incrementally reducing the signal strength (increasing the dB attenuation) until the optical link fails, thus determining the signal’s existing safety margin.The optical attenuator is a female to female configuration and connectorized with LC.
LC Single Mode Attenuator Specification
| Conector de fibra | LC/UPC |
| Género del conector | Fijo Hembra a Hembra |
| Tipo de virola | Cerámica de circonio |
| Modo de transferencia | Modo singular |
| Atenuación | 1dB – 30dB |
| Longitud de onda operativa (nm) | 1260~1620(SM) |
| Precisión de atenuación | ±0,5dB |
| Pérdida de retorno | ≥45dB |
| Pérdida dependiente de la polarización | ≤0,2 dB |
| Potencia de entrada óptica máxima | 200mW |
| Humedad | 95%RH |
| Rango de temperatura de funcionamiento | -40~80°C |
| Rango de temperatura de almacenamiento | -40~85°C |
