Introduction to ST to LC Fiber Jumper
ST to LC Fiber Jumper is the fiber optic cable assembled one ST fiber optic connector and one LC fiber optic connector. ST to LC Fiber Jumper possible connect to CATV, optical switch or telecommunication equipment rapidly. ST to LC Fiber Jumper thick layer of protection is used to connect the optical transmitter, receiver and the fiber optic terminal box. ST to LC Fiber Jumper APC Single Mode duplex widely used in the telecom structure projects.
ST to LC Fiber Jumper Specifications
tipo de conector | LC a ST |
Tipo polaco | APC to PC |
Modo de fibra | OS2 9/125 μm |
Pérdida de inserción | ≤0,3dB |
Pérdida de retorno | ≥60dB |
Longitud de onda | 1310/1550nm |
Grado de fibra | G.652.D |
Radio de curvatura mínimo | 30mm |
Atenuación a 1310 nm | 0,36dB/km |
Atenuación a 1550 nm | 0,22dB/km |
Recuento de fibras | simplex |
Diámetro del cable | 2,0 mm |
Cubierta para cables | CLORURO DE POLIVINILO |
Polaridad | A(Tx) a B(Rx) |
Temperatura de funcionamiento | -20~70°C |
Temperatura de almacenamiento | -40~80°C |
FAQs on ST to LC Fiber Jumper
What is the max pulling force that can be applied during installation for the standard cable?
The max pulling force during the cable installation is 70N.