Introduction to E2000 APC Patch Cord
E2000 APC Patch Cord are suitable for telecom, datacom, data center and some critical applications. E2000 APC Patch Cord provide flexible interconnection to active equipment, passive optical devices and cross connects. E2000 APC Patch Cord Single Mode Simplex are manufacture using LSZH cables which confirm to IEC, EIA TIA or Telcordia standards. E2000 Patch Cord are terminated with optimized range physical contact (single mode & multimode) and angled physical contact (single mode) Zirconia ferrule connectors.
E2000 APC Patch Cord Specifications
| Type de connecteur | E2000 – E2000 |
| Type polonais | APC to APC |
| Mode fibre | OS2 9/125μm |
| Perte d'insertion | ≤0,3dB |
| Perte de retour | ≥60dB |
| Longueur d'onde | 1310/1550nm |
| Qualité des fibres | G.652.D |
| Rayon de courbure minimum | 30mm |
| Attenuation at 1310 nm | 0.36 dB/km |
| Attenuation at 1550 nm | 0.22 dB/km |
| Nombre de fibres | Simplexe |
| Diamètre du câble | 2,0 mm |
| Gaine de câble | PVC |
| Polarité | A(Tx) à B(Rx) |
| Température de fonctionnement | -20~70°C |
| Température de stockage | -40~80°C |
FAQs on E2000 APC Patch Cord
What’s the dB loss through this connector for Audio?
The insertion loss is 0.3dB theoretically.
