Introduction to FC APC Patch Cable
FC APC Patch Cable made by Single Mode 9/125um bend insensitive fiber optic cable with four FC/APC fiber optic connectors. FC APC Patch Cable is ideal for connecting 1G/10G/40G/100G/400G Ethernet connections. FC APC Patch Cable can transport data for up to 10km at 1310nm, or up to 40km at 1550nm. Each FC APC Patch Cable Single Mode duplex 9/125um PVC/LSZH is 100% optically inspected and tested for insertion loss before you receive it. SC fiber optic jumper pull-proof jacket design surrounds the popular 9/125um single-mode fiber.
FC APC Patch Cable Specifications
| Type de connecteur | FC to FC |
| Type polonais | APC to APC |
| Mode fibre | OS2 9/125μm |
| Perte d'insertion | ≤0,3dB |
| Perte de retour | ≥60dB |
| Longueur d'onde | 1310/1550nm |
| Qualité des fibres | G.652.D |
| Rayon de courbure minimum | 30mm |
| Attenuation at 1310 nm | 0.36 dB/km |
| Attenuation at 1550 nm | 0.22 dB/km |
| Nombre de fibres | Simplexe |
| Diamètre du câble | 2,0 mm |
| Gaine de câble | PVC |
| Polarité | A(Tx) à B(Rx) |
| Température de fonctionnement | -20~70°C |
| Température de stockage | -40~80°C |
FAQs on FC APC Patch Cable
What is the max pulling force that can be applied during installation for the standard cable?
The max pulling force during the cable installation is 70N.
