Introduction to FC PC Patch Cord
FC PC Patch Cord are suitable for telecom, datacom, data center and some critical applications. FC PC Patch Cord provide flexible interconnection to active equipment, passive optical devices and cross connects. FC PC Patch Cord Single Mode Simplex are manufacture using LSZH cables which confirm to IEC, EIA TIA or Telcordia standards. FC PC Patch Cord Single Mode Duplex 9/125um are terminated with optimized range physical contact (single mode & multimode) and angled physical contact (single mode) Zirconia ferrule connectors.
FC PC Patch Cord Specifications
| Type de connecteur | FC to FC |
| Type polonais | UPC to UPC |
| Mode fibre | OS2 9/125μm |
| Perte d'insertion | ≤0,3dB |
| Perte de retour | ≥60dB |
| Longueur d'onde | 1310/1550nm |
| Qualité des fibres | G.652.D |
| Rayon de courbure minimum | 30mm |
| Attenuation at 1310 nm | 0.36 dB/km |
| Attenuation at 1550 nm | 0.22 dB/km |
| Nombre de fibres | Simplexe |
| Diamètre du câble | 2,0 mm |
| Gaine de câble | PVC |
| Polarité | A(Tx) à B(Rx) |
| Température de fonctionnement | -20~70°C |
| Température de stockage | -40~80°C |
FAQs on FC PC Patch Cord
What is the max pulling force that can be applied during installation for the standard cable?
The max pulling force during the cable installation is 70N.
