Aperçu
The Fiber Optic Patch Cable ST SC is terminated with one ST connector and one SC connector, to provide the necessary connection between fiber networking devices for high-speed, long distance networks. This Fiber Optic Patch Cable ST SC has LSZH flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire.
Fiber Optic Patch Cable ST SC can use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration. Our Fiber Optical Patch Cable ST SC is individually tested.
Caractéristiques
| Type de connecteur | SC to SC |
| Type polonais | APC to APC |
| Mode fibre | OS2 9/125μm |
| Perte d'insertion | ≤0,3dB |
| Perte de retour | ≥60dB |
| Longueur d'onde | 1310/1550nm |
| Qualité des fibres | G.652.D |
| Rayon de courbure minimum | 30mm |
| Attenuation at 1310 nm | 0.36 dB/km |
| Attenuation at 1550 nm | 0.22 dB/km |
| Nombre de fibres | Simplexe |
| Diamètre du câble | 2,0 mm |
| Gaine de câble | PVC |
| Polarité | A(Tx) à B(Rx) |
| Température de fonctionnement | -20~70°C |
| Température de stockage | -40~80°C |
FAQ
Fiber Optic Patch Cable ST SC works through carrying communication signals using pulses of light generated by small lasers orlight-emitting diodes. The centre of each strand is called the core, this core is the pathway for light to travel. The core is surrounded by a layer of glass that reflects light inward to avoid loss of signal and allows the light to pass through bends in the ST to SC Cable.
The connector length is included in the total length of Fiber Optic Patch Cable ST SC.
