Introduction to Fiber Patch Cord FC LC
Fiber Patch Cord FC LC assembled with one LC/PC connector and one FC/PC connector. LC to FC Fiber Patch Cable Single Mode simplex is suitable for fast Ethernet, gigabit Ethernet and fiber channel applications, such as in data center, telecom room, server farms, cloud storage networks, and any place fiber jumper cables are needed. Fiber Patch Cord FC LC is ideal for connecting 100/1000BASE-SX transceivers etc. for fast Ethernet, gigabit Ethernet and fiber channel applications.
Fiber Patch Cord FC LC Specifications
| Type de connecteur | FC to LC |
| Type polonais | UPC to APC |
| Mode fibre | OS2 9/125μm |
| Perte d'insertion | ≤0,3dB |
| Perte de retour | ≥60dB |
| Longueur d'onde | 1310/1550nm |
| Qualité des fibres | G.652.D |
| Rayon de courbure minimum | 30mm |
| Attenuation at 1310 nm | 0.36 dB/km |
| Attenuation at 1550 nm | 0.22 dB/km |
| Nombre de fibres | Simplexe |
| Diamètre du câble | 2,0 mm |
| Gaine de câble | PVC |
| Polarité | A(Tx) à B(Rx) |
| Température de fonctionnement | -20~70°C |
| Température de stockage | -40~80°C |
FAQs on Fiber Patch Cord FC LC
What is the max pulling force that can be applied during installation for the standard cable?
Thanks for your question. The max pulling force during the cable installation is 70N.
