Introduction to LC LC Attenuator
LC LC Attenuators are devices to reduce the optical fiber power by a certain level within the fiber optic network. LC LC Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements. This may occur because of a mismatch between the transmitters/receivers (transceivers, media converters), or because the media converters are designed for a much longer distance than for which they are being used. Sometimes LC Attenuators are also used for stress testing a network link by incrementally reducing the signal strength (increasing the dB attenuation) until the optical link fails, thus determining the signal’s existing safety margin.
Caractéristiques
- Environmentally stable
- Installation facile
- Spécifications conçues sur mesure
- Faible perte de retour
- Facilement montable sur panneau
- Emballage compact
- Fixed attenuation values: 3 dB
LC LC Attenuator Specification
Paramètres | Valeur |
---|---|
Connecteur fibre | LC/UPC |
Sexe du connecteur | Fixe mâle à femelle |
Type de virole | Céramique Zircone |
Mode de transfert | Mode unique |
Atténuation | 3dB |
Longueur d'onde de fonctionnement (nm) | 1260 ~ 1620 (SM) |
Précision d'atténuation | ±0,5dB |
Perte de retour | ≥45dB |
Perte dépendante de la polarisation | ≤0,2dB |
Puissance d'entrée optique maximale | 200 mW |
Humidité | 95%RH |
Plage de température de fonctionnement | -40~80°C |
Plage de température de stockage | -40~85°C |