Introduction to LC Optical Attenuator
LC Optical Attenuators are devices to reduce the optical fiber power by a certain level within LC connector of fiber optic network. Fiber Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements. This may occur because of a mismatch between the transmitters/receivers (transceivers, media converters), or because the media converters are designed for a much longer distance than for which they are being used. Sometimes attenuators are also used for stress testing a network link by incrementally reducing the signal strength (increasing the dB attenuation) until the optical link fails, thus determining the signal’s existing safety margin.
Caractéristiques
- Un coup de poignard environnemental
- Installation facile
- Spécifications conçues sur mesure
- Faible perte de retour
- Facilement montable sur panneau
- Emballage compact
- Fixed attenuation values increments from 1 to 25dB
LC Optical Attenuator Specification
| Connecteur fibre | LC/APC |
| Sexe du connecteur | Fixe mâle à femelle |
| Type de virole | Céramique Zircone |
| Mode de transfert | Mode unique |
| Atténuation | 1dB to 30dB |
| Longueur d'onde de fonctionnement (nm) | 1260 ~ 1620 (SM) |
| Précision d'atténuation | ±0,5dB |
| Perte de retour | ≥45dB |
| Perte dépendante de la polarisation | ≤0,2dB |
| Puissance d'entrée optique maximale | 200 mW |
| Humidité | 95%RH |
| Plage de température de fonctionnement | -40~80°C |
| Plage de température de stockage | -40~85°C |
