Maison > Des produits > Câbles de brassage à fibre optique > Vitesse nominale de fibre de câble de brassage multimode ST

Vitesse nominale de fibre de câble de brassage multimode ST

PAT-ST-ST-MM-SX
  • Délai : 3 jours ouvrés
  • Échantillon gratuit en stock
  • Garantie de 540 jours · Retours sous 30 jours
  • Soutien technique

Aperçu

FiberCheap Multimode ST Patch Cable Fiber Rated Speed, Each end pre-terminated with 2 stainless steel ST connectors.  low loss, data transmission. OFNR rated, orange colored, 0.9 ,2.0, 3.0mm diameter, PVC jacket with zip-cord.

  • Length: 1~10 Meter
  • Jacket Color: Orange – This is the standard jacket color for these Multimode ST Patch Cable Fiber Rated Speed
  • Core / Cladding: 62.5/125m – 62.5 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter)

Caractéristiques

Type de connecteurST to ST
Type polonaisCUP
Mode fibreOM1
Perte d'insertion≤0,3dB
Perte de retour≥60dB
Qualité des fibresOM1
Rayon de courbure minimum30mm
Nombre de fibresSimplexe
Diamètre du câble3.0mm
Gaine de câblePVC
PolaritéA(Tx) à B(Rx)
Température de fonctionnement-20~70°C
Température de stockage-40~80°C

FAQ

Is multimode fiber full duplex?

Duplex Single-Mode and Multimode Fiber. Both simplex and duplex fiber optic cables come in single-mode or multimode.

Is single mode faster than multimode?

Compared to the multimode fiber, the single mode patch cords carry a higher bandwidth, but it requires a light source with a narrow spectral width. The single mode gives a higher transmission and up to 50 times more distance than the multimode. The core from a single mode cable is smaller than one from a multimode.

Obtenez un devis instantané