Aperçu
The ST to SC Cable is terminated with one ST connector and one SC connector, to provide connection between fiber networking devices for high-speed, long distance networks. ST to SC Cable has yellow jacket and a long working distance. This ST to SC Cable model consists of one side-by-side simplex cables with Ultra Polished Connector (UPC).
FiberCheap ST to SC Fiber Cable is individually tested for quality and reliability and feature Corning glass and superior construction.
Caractéristiques
| Type de connecteur | ST to SC |
| Type polonais | CUP |
| Mode fibre | OS2 9/125μm |
| Perte d'insertion | ≤0,3dB |
| Perte de retour | ≥60dB |
| Longueur d'onde | 1310/1550nm |
| Qualité des fibres | G.652.D |
| Rayon de courbure minimum | 30mm |
| Attenuation at 1310 nm | 0.36 dB/km |
| Attenuation at 1550 nm | 0.22 dB/km |
| Nombre de fibres | Simplexe |
| Diamètre du câble | 2,0 mm |
| Gaine de câble | PVC |
| Polarité | A(Tx) à B(Rx) |
| Température de fonctionnement | -20~70°C |
| Température de stockage | -40~80°C |
FAQ
ST to SC Cable works through carrying communication signals using pulses of light generated by small lasers orlight-emitting diodes. The centre of each strand is called the core, this core is the pathway for light to travel. The core is surrounded by a layer of glass that reflects light inward to avoid loss of signal and allows the light to pass through bends in the ST to SC Cable.
