Fiber Access Terminal (FAT) Manufacturer in China

What is a fiber access terminal?

Fiber Access Terminal incorporate hardened connector technology that is designed to withstand the rugged outside plant environment. Hardened connectors are factory-terminated and environmentally sealed for use in optical drop cable deployments.

Optical fiber terminal boxes can be of many different types:

Based on Cable Connection Method

• Straight-through Terminal Box: This terminal box has a single external hole for the receiving line.
• Branched-type Terminal Box: This terminal box has several holes for the receiving line.

Based on the number of fibers fused

A terminal box can be divided into 2 in, 8 out, 4 in 24 out, 4 in 12 out, etc.

Based on the shell material

The terminal boxes can be plastic shell or metal shell optical fiber terminal boxes.

Based on the style

These boxes can be rack-drawer, wall-mounted, desktop-type, and other types.

Indoor Fiber Access Terminal

The indoor fiber distribution terminal is a compact fiber box solution for installation requirements in small to mid-sized MDUs, multiple dwelling units, or multiple tenant units (MTU).

Outdoor Fiber Access Terminal

Outdoor Fiber Distribution Terminals are used for installing fiber in small and medium-sized MDUs, or multi-dwelling units.

Custom a Fiber Access Terminal is easy here with Bativ, You need to make clear your requirements, We will send you our draft for the custom fiber optic products, Take 2 ports Fiber Access Terminal for example, We can make a 3D model for your reference until you are satisfied with it, Then we can get back to you with our best quote or sample for your quality evaluation.

Installation of the Fiber Access Terminal must be done under the supervision of a skilled technician or engineer. Here are the various stages in the installation of the FTB.

Pemasangan

The optical Fiber Access Terminal is mounted on the wall or on the 19 inches (483 mm) wide standard rack. The front panel should be easily accessible as the cable enters from the bottom.

Cable End Preparation

Any fiber cable’s end has to be prepared before starting the cable entry in the optical Fiber Access Terminal. The cable end preparation procedure is available from the supplier. It is crucial to protect the bare fibers at this stage. This is because they get exposed after following the cable end preparation.

Cable Entry

Once the cable ends are prepared, a rubber diaphragm at the box’s cable entry hole needs to be pierced. This is to be done before inserting the cable in the box, as this opening is blocked in new boxes. 

Cable End Clamping

The Fiber Access Terminal has several plastic fiber guide posts mounted in it. The fiber in the sleeves or transport tube of the cable is routed through them. Through these guideposts, all the excess length of the cable is brought into the selected splice tray. Then, using a plastic clamping strap, it is clamped at the splice tray’s entry point.

Splicing

The most important part of the installation process is splicing the optical fiber from the cable to the pigtails. A splicing machine is used for this purpose. It is kept close to the termination box on a table.

A stainless steel wire mechanism is released from its spring catch to open a particular splice tray. A splicing machine is used to splice the pigtail fibers so that the fiber ends come out of the cable. They are then pushed to fit into the fused splice.

The process is carried on for all the splices to be stored in splice trays. These splice trays are then placed in a stack inside the termination box. The stainless steel wire closing mechanism is then closed with the box.

Tergantung kuantitas yang akan Anda pesan, Biasanya 1-3 hari untuk 1000pcs, dan 7-10 hari untuk 1000-20000pcs. Dan 10-15 hari untuk 20.000 hingga 200.000 pcs.

Free sample is available any time, We believe it will be a good start between us when you tested our Fiber Access Terminal samples.