Introduction to LC to ST Cable
LC to ST Cable assembled with one LC/PC connector and one ST/PC connector. Fiber Optic LC to ST Cable Multimode duplex OM1 is suitable for fast Ethernet, gigabit Ethernet and fiber channel applications, such as in data center, telecom room, server farms, cloud storage networks, and any place fiber jumper cables are needed. LC to ST Cable OM1 Simplex fiber optic cable is ideal for connecting 100/1000BASE-SX transceivers etc. for fast Ethernet, gigabit Ethernet and fiber channel applications.
LC to ST Cable Specifications
| Tipo di connettore | LC to ST |
| Tipo polacco | UPC |
| Modalità fibra | 62.5/125μm |
| Perdita di inserzione | ≤0,3 dB |
| Perdita di ritorno | ≥45dB |
| Lunghezza d'onda | 850/1300nm |
| Grado di fibra | OM1 |
| Raggio di curvatura minimo | 30 mm |
| Conteggio delle fibre | Duplex |
| Diametro del cavo | 2,0 mm |
| Guaina per cavi | PVC |
| Polarità | Da A(Tx) a B(Rx) |
| temperatura di esercizio | -20~70°C |
| Temperatura di conservazione | -40~80°C |
FAQs on LC to ST Cable
We are looking to put in a fiber backbone between our 2 buildings about 300 feet apart outdoors. What cable and connector type (APC or UPC) would you recommend for a LAN link like this?
The military-grade fiber patch cable is recommended to you. As for the polish type, it depends on your application and equipment, and please kindly note that generally UPC is used for connecting to fiber optic transceivers.
