Introduction to LC Optical Attenuator
LC Optical Attenuators are devices to reduce the optical fiber power by a certain level within LC connector of fiber optic network. Fiber Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements. This may occur because of a mismatch between the transmitters/receivers (transceivers, media converters), or because the media converters are designed for a much longer distance than for which they are being used. Sometimes attenuators are also used for stress testing a network link by incrementally reducing the signal strength (increasing the dB attenuation) until the optical link fails, thus determining the signal’s existing safety margin.
Caratteristiche
- Colposo ambientale
- Installazione facile
- Specifiche progettate su misura
- Bassa perdita di rendimento
- Facilmente montabile a pannello
- Confezione compatta
- Fixed attenuation values increments from 1 to 25dB
LC Optical Attenuator Specification
Connettore in fibra | LC/APC |
Genere del connettore | Risolto il problema da maschio a femmina |
Tipo di ghiera | Ceramica allo zirconio |
Modalità di trasferimento | Modalità singola |
Attenuazione | 1dB to 30dB |
Lunghezza d'onda operativa (nm) | 1260~1620(SM) |
Precisione dell'attenuazione | ±0,5 dB |
Perdita di ritorno | ≥45dB |
Perdita dipendente dalla polarizzazione | ≤0,2 dB |
Potenza massima in ingresso ottico | 200 mW |
Umidità | 95%RH |
Intervallo operativo di temperatura | -40~80°C |
Intervallo di temperatura di conservazione | -40~85°C |