Casa > Prodotti > Cavi patch in fibra ottica > Velocità nominale del cavo patch in fibra multimodale ST

Velocità nominale del cavo patch in fibra multimodale ST

PAT-ST-ST-MM-SX
  • Tempi di consegna: 3 giorni lavorativi
  • Campione gratuito in magazzino
  • Garanzia di 540 giorni · Resi entro 30 giorni
  • Supporto tecnico

Panoramica

FiberCheap Multimode ST Patch Cable Fiber Rated Speed, Each end pre-terminated with 2 stainless steel ST connectors.  low loss, data transmission. OFNR rated, orange colored, 0.9 ,2.0, 3.0mm diameter, PVC jacket with zip-cord.

  • Length: 1~10 Meter
  • Jacket Color: Orange – This is the standard jacket color for these Multimode ST Patch Cable Fiber Rated Speed
  • Core / Cladding: 62.5/125m – 62.5 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter)

Specifiche

Tipo di connettoreST to ST
Tipo polaccoUPC
Modalità fibraOM1
Perdita di inserzione≤0,3 dB
Perdita di ritorno≥60dB
Grado di fibraOM1
Raggio di curvatura minimo30 mm
Conteggio delle fibreSemplice
Diametro del cavo3.0mm
Guaina per caviPVC
PolaritàDa A(Tx) a B(Rx)
temperatura di esercizio-20~70°C
Temperatura di conservazione-40~80°C

Domande frequenti

Is multimode fiber full duplex?

Duplex Single-Mode and Multimode Fiber. Both simplex and duplex fiber optic cables come in single-mode or multimode.

Is single mode faster than multimode?

Compared to the multimode fiber, the single mode patch cords carry a higher bandwidth, but it requires a light source with a narrow spectral width. The single mode gives a higher transmission and up to 50 times more distance than the multimode. The core from a single mode cable is smaller than one from a multimode.

Ottieni un preventivo immediato