Introduction to ST to LC Fiber Jumper
ST to LC Fiber Jumper is the fiber optic cable assembled one ST fiber optic connector and one LC fiber optic connector. ST to LC Fiber Jumper possible connect to CATV, optical switch or telecommunication equipment rapidly. ST to LC Fiber Jumper thick layer of protection is used to connect the optical transmitter, receiver and the fiber optic terminal box. ST to LC Fiber Jumper APC Single Mode duplex widely used in the telecom structure projects.
ST to LC Fiber Jumper Specifications
Tipo di connettore | LC to ST |
Tipo polacco | APC to PC |
Modalità fibra | OS2 9/125μm |
Perdita di inserzione | ≤0,3 dB |
Perdita di ritorno | ≥60dB |
Lunghezza d'onda | 1310/1550 nm |
Grado di fibra | G.652.D |
Raggio di curvatura minimo | 30 mm |
Attenuazione a 1310 nm | 0,36 dB/km |
Attenuazione a 1550 nm | 0,22 dB/km |
Conteggio delle fibre | Semplice |
Diametro del cavo | 2,0 mm |
Guaina per cavi | PVC |
Polarità | Da A(Tx) a B(Rx) |
temperatura di esercizio | -20~70°C |
Temperatura di conservazione | -40~80°C |
FAQs on ST to LC Fiber Jumper
What is the max pulling force that can be applied during installation for the standard cable?
The max pulling force during the cable installation is 70N.