Introduction to 1×12 Fiber PLC Splitter
This PLC Splitter Module is a plastic module called an ABS box with ruggedized fiber jackets of 2mm and up to 3mm with no connectors.FiberCheap PLC splitters offer superior optical performance, high stability and high reliability to meet various application requirements.
ciri-ciri
- Saluran: 1×12
- Panjang kabel: disesuaikan
- Jenis gentian: G657A1 atau seperti yang disesuaikan
- Saiz Kecil
- Pakej: Beg PP atau pakej lepuh
- ABS box type module
- Plug and Play Ready
- Multi-way cost is low, the more roads, the more obvious cost advantage.
- Low Polarization Dependent Loss
- Good uniformity & Low PDL
1×12 Fiber PLC Splitter Specifications
| Jenis Konfigurasi | 1×2 |
| Jenis Pemisah PLC | Pemisah PLC Tanpa Sekat |
| Jenis Penyambung | SC/APC |
| Jenis Gentian | Mod Tunggal G657A1 atau G652D |
| Panjang gentian | 1m atau 1.5m atau Diminta |
| Gaya Pakej | Tiub Keluli Tanpa Sekat |
| Lebar Jalur Pengendalian | 1260~1650nm |
| Diameter gentian | 0.9mm |
| Kehilangan Sisipan Biasa (≤) dB | 12.2 |
| Kehilangan Sisipan (≤) dB | 12.49 |
| Keseragaman Kehilangan (≤) dB | 0.4 |
| Kehilangan Bergantung Polarisasi (≤) dB | 0.2 |
| Kehilangan Bergantung Panjang Gelombang (≤) dB | 0.3 |
| Kerugian Pulangan (≥) dB | 50 |
| Directivity (≥) dB | 55 |
| Kehilangan Bergantung Suhu (≤) dB | 0.5 |
FAQs on 1×12 Fiber PLC Splitter
Hi, PLC splitter is generally used in PON network, if you use it in PON network, then it can meet your requirement, but if not, it can not achieve the bi-directional transmission. Because if multiple transceivers in the same wavelength from fiber 4 transmit signals to the IN fiber transceiver, then this transceiver cannot distinguish the signals. And PON network adopts Time division multiplexing technology, so the transceiver can distinguish the signals from different transceivers.
