Introduction to 1×4 PLC Splitter
1×4 PLC Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. 1×4 PLC SplitterLGX Module provides a plug-and-play method for integration in the network, which eliminates any risks during installation. It eliminates the need for splicing machines on the field and there is no need for skilled personnel for deployment. The following figure shows 1×4 LGX PLC Splitter applied in the 1U rack chassis in GPON network.
Aplikasi
- Rangkaian LAN, WAN & Metro
- Rangkaian Telekomunikasi
- Rangkaian Optik Pasif
- Sistem FTT(X).
- CATV
- Modul Nilai Tambah
1×4 PLC Splitter Specifications
| Jenis Konfigurasi | 1×4 |
| Jenis Pemisah PLC | LGX Mini Plug Box |
| Jenis Penyambung | SC/APC |
| Jenis Gentian | Mod Tunggal G657A1 atau G652D |
| Panjang gentian | 1m atau 1.5m atau Diminta |
| Gaya Pakej | Tiub Keluli Tanpa Sekat |
| Lebar Jalur Pengendalian | 1260~1650nm |
| Diameter gentian | 0.9mm |
| Kehilangan Sisipan Biasa (≤) dB | 7 |
| Kehilangan Sisipan (≤) dB | 7.2 |
| Keseragaman Kehilangan (≤) dB | 0.4 |
| Kehilangan Bergantung Polarisasi (≤) dB | 0.2 |
| Kehilangan Bergantung Panjang Gelombang (≤) dB | 0.3 |
| Kerugian Pulangan (≥) dB | 50 |
| Directivity (≥) dB | 55 |
| Kehilangan Bergantung Suhu (≤) dB | 0.5 |
FAQs on 1×4 PLC Splitter
Hi, PLC splitter is generally used in PON network, if you use it in PON network, then it can meet your requirement, but if not, it can not achieve the bi-directional transmission. Because if multiple transceivers in the same wavelength from fiber 4 transmit signals to the IN fiber transceiver, then this transceiver cannot distinguish the signals. And PON network adopts Time division multiplexing technology, so the transceiver can distinguish the signals from different transceivers.
