Rumah > Produk > Pemisah Gentian Optik > 1×64 Cassette Module PLC Splitter

1×64 Cassette Module PLC Splitter

PLC-1-64-PLUG
  • Masa Utama: 3 Hari Bekerja
  • Sampel Percuma dalam Stok
  • Waranti 540 Hari · Pemulangan 30 Hari
  • Sokongan teknikal

Introduction to 1×64 Fiber PLC Splitter

PLC (Planar Lightwave Circuit) Splitters are Single-mode splitters with an even split ratio from one input fiber to multiple output fibers. This 1×64 Fiber PLC Splitter is a 1×64, with 1 input and 64 output fibers with an even split ratio across all fibers regardless of input wavelength. 1×64 Fiber PLC Splitter Cassette Module provides a plug-and-play method for integration in the network, which eliminates any risks during installation. 1×64 Fiber PLC Splitter eliminates the need for splicing machines on the field and there is no need for skilled personnel for deployment. The following figure shows 1×64 Fiber PLC Splitter Cassette Module Splitter applied in the 1U rack chassis in GPON network.

Connectorized PLC Splitters are available with your choice of Fiber Optic Connectors: LC/UPC, LC/APC, SC/UPC, SC/APC, FC/UPC, FC/APC, and ST/UPC.

Aplikasi

  • Rangkaian LAN, WAN & Metro
  • Rangkaian Telekomunikasi
  • Rangkaian Optik Pasif
  • Sistem FTT(X).
  • CATV
  • Modul Nilai Tambah

1×64 Fiber PLC Splitter Specifications

Jenis Konfigurasi1×64
Jenis Pemisah PLCCassette Module PLC Splitter
Jenis PenyambungSC/APC
Jenis GentianMod Tunggal G657A1 atau G652D
Panjang gentian1m atau 1.5m atau Diminta
Gaya PakejTiub Keluli Tanpa Sekat
Lebar Jalur Pengendalian1260~1650nm
Diameter gentian0.9mm
Kehilangan Sisipan Biasa (≤) dB19.7
Kehilangan Sisipan (≤) dB21.2
Keseragaman Kehilangan (≤) dB2.5
Kehilangan Bergantung Polarisasi (≤) dB0.4
Kehilangan Bergantung Panjang Gelombang (≤) dB0.8
Kerugian Pulangan (≥) dB50
Directivity (≥) dB55
Kehilangan Bergantung Suhu (≤) dB1

FAQs on 1×64 Fiber PLC Splitter

I have a question regarding PLC splitter. Is there any way to make it bi-directional, if you shine light into fiber 4, you will see any light out of the IN fiber?

Hi, PLC splitter is generally used in PON network, if you use it in PON network, then it can meet your requirement, but if not, it can not achieve the bi-directional transmission. Because if multiple transceivers in the same wavelength from fiber 4 transmit signals to the IN fiber transceiver, then this transceiver cannot distinguish the signals. And PON network adopts Time division multiplexing technology, so the transceiver can distinguish the signals from different transceivers.

Dapatkan Sebut Harga Segera