Introduction to 1×8 Fiber PLC Splitter
1×8 Fiber PLC Splitter feature low IL& PDL, high isolation suit for 1260nm~1650nm optical fiber signals’ splitter and distributing in PON networks. 1×8 Fiber PLC Splitter with one input and 8 output, It can assembled with 9 units fiber optic connectors as your requirement. 1×8 Fiber PLC Splitter Blockless single mode use the G657A fiber and the max bending radius of the fiber is 15mm. 1×8 Fiber PLC Splitter directly with 0.9mm fiber terminals, tail length according to customer specified.
Aplikasi
- Rangkaian LAN, WAN & Metro
- Rangkaian Telekomunikasi
- Rangkaian Optik Pasif
- Sistem FTT(X).
- CATV
- Modul Nilai Tambah
1×8 Fiber PLC Splitter Specifications
| Jenis Konfigurasi | 1×8 |
| Jenis Pemisah PLC | Pemisah PLC Tanpa Sekat |
| Jenis Penyambung | SC/APC |
| Jenis Gentian | Mod Tunggal G657A1 atau G652D |
| Panjang gentian | 1m atau 1.5m atau Diminta |
| Gaya Pakej | Tiub Keluli Tanpa Sekat |
| Lebar Jalur Pengendalian | 1260~1650nm |
| Diameter gentian | 0.9mm |
| Kehilangan Sisipan Biasa (≤) dB | 10.2 |
| Kehilangan Sisipan (≤) dB | 10.7 |
| Keseragaman Kehilangan (≤) dB | 0.4 |
| Kehilangan Bergantung Polarisasi (≤) dB | 0.2 |
| Kehilangan Bergantung Panjang Gelombang (≤) dB | 0.3 |
| Kerugian Pulangan (≥) dB | 50 |
| Directivity (≥) dB | 55 |
| Kehilangan Bergantung Suhu (≤) dB | 0.5 |
FAQs on 1×8 Fiber PLC Splitter
No, it doesn’t. Our PLC splitters only support single mode application, and the fiber type is G657A1, if you want multimode splitters, please refer to FBT Coupler Splitter.
You can check the below table to see the 1×8 plc splitter loss and simliar 1xn plc splitters
| Splitter Ratio | Ideal Loss | Excess Loss (dB, max) | Typical Loss (dB) |
| 1:2 plc splitter | 3dB | 1dB | 4dB |
| 1:4 plc splitter | 6dB | 1dB | 7dB |
| 1:8 plc splitter | 9dB | 2dB | 11dB |
| 1:16 plc splitter | 12dB | 3dB | 15dB |
| 1:32 plc splitter | 15dB | 4dB | 19dB |
