Introduction to 1×8 Fiber PLC Splitter
1×8 Fiber PLC Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. 1×8 Fiber PLC Splitter LGX Module provides a plug-and-play method for integration in the network, which eliminates any risks during installation. It eliminates the need for splicing machines on the field and there is no need for skilled personnel for deployment. The following figure shows 1×8 LGX PLC Splitter applied in the 1U rack chassis in GPON network.
Aplikasi
- Rangkaian LAN, WAN & Metro
- Rangkaian Telekomunikasi
- Rangkaian Optik Pasif
- Sistem FTT(X).
- CATV
- Modul Nilai Tambah
1×8 Fiber PLC Splitter Specifications
| Jenis Konfigurasi | 1×8 |
| Jenis Pemisah PLC | LGX Module PLC Splitter |
| Jenis Penyambung | SC/APC |
| Jenis Gentian | Mod Tunggal G657A1 atau G652D |
| Panjang gentian | 1m atau 1.5m atau Diminta |
| Gaya Pakej | Tiub Keluli Tanpa Sekat |
| Lebar Jalur Pengendalian | 1260~1650nm |
| Diameter gentian | 0.9mm |
| Kehilangan Sisipan Biasa (≤) dB | 10.2 |
| Kehilangan Sisipan (≤) dB | 10.7 |
| Keseragaman Kehilangan (≤) dB | 0.4 |
| Kehilangan Bergantung Polarisasi (≤) dB | 0.2 |
| Kehilangan Bergantung Panjang Gelombang (≤) dB | 0.3 |
| Kerugian Pulangan (≥) dB | 50 |
| Directivity (≥) dB | 55 |
| Kehilangan Bergantung Suhu (≤) dB | 0.5 |
FAQs on 1×8 Fiber PLC Splitter
Thanks for your question, it needs to be determined according to your specific application. If you use it in PON network, that’s ok. But it doesn’t meet your needs in the Ethernet.
