Introduction to LC Optical Attenuator
LC Optical Attenuators are devices to reduce the optical fiber power by a certain level within LC connector of fiber optic network. Fiber Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements. This may occur because of a mismatch between the transmitters/receivers (transceivers, media converters), or because the media converters are designed for a much longer distance than for which they are being used. Sometimes attenuators are also used for stress testing a network link by incrementally reducing the signal strength (increasing the dB attenuation) until the optical link fails, thus determining the signal’s existing safety margin.
ciri-ciri
- Environmentally stab
- Pemasangan Mudah
- Spesifikasi Rekaan Tersuai
- Kerugian Pulangan Rendah
- Mudah Dipasang Panel
- Pembungkusan Padat
- Fixed attenuation values increments from 1 to 25dB
LC Optical Attenuator Specification
| Penyambung Gentian | LC/APC |
| Jantina Penyambung | Tetap Lelaki kepada Perempuan |
| Jenis Ferrule | Seramik Zirkonia |
| Mod Pemindahan | Mod Tunggal |
| Pelemahan | 1dB to 30dB |
| Panjang Gelombang Operasi(nm) | 1260~1620(SM) |
| Ketepatan Pengecilan | ±0.5dB |
| Kerugian Pulangan | ≥45dB |
| Kehilangan Bergantung Polarisasi | ≤0.2dB |
| Kuasa Input Optik Maks | 200mW |
| Kelembapan | 95%RH |
| Julat Suhu Operasi | -40~80°C |
| Julat Suhu Penyimpanan | -40~85°C |
