Introduction to 1×4 PLC Splitter
1×4 PLC Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. 1×4 PLC SplitterLGX Module provides a plug-and-play method for integration in the network, which eliminates any risks during installation. It eliminates the need for splicing machines on the field and there is no need for skilled personnel for deployment. The following figure shows 1×4 LGX PLC Splitter applied in the 1U rack chassis in GPON network.
Toepassingen
- LAN-, WAN- en metronetwerken
- Telecommunicatienetwerken
- Passieve optische netwerken
- FTT(X)-systemen
- CATV
- Module met toegevoegde waarde
1×4 PLC Splitter Specifications
| Configuratietype | 1×4 |
| PLC-splittertype | LGX Mini Plug Box |
| Connectortype | SC/APC |
| Vezeltype | Enkele modus G657A1 of G652D |
| Vezellengte | 1m of 1,5m of Gevraagd |
| Pakketstijl | Blokloze stalen buis |
| Operationele bandbreedte | 1260 ~ 1650 nm |
| Vezeldiameter | 0,9 mm |
| Typisch invoegverlies (≤) dB | 7 |
| Invoegverlies (≤) dB | 7.2 |
| Verliesuniformiteit (≤) dB | 0.4 |
| Polarisatie-afhankelijk verlies (≤) dB | 0.2 |
| Golflengte-afhankelijk verlies (≤) dB | 0.3 |
| Retourverlies (≥) dB | 50 |
| Directiviteit (≥) dB | 55 |
| Temperatuurafhankelijk verlies (≤) dB | 0.5 |
FAQs on 1×4 PLC Splitter
Hi, PLC splitter is generally used in PON network, if you use it in PON network, then it can meet your requirement, but if not, it can not achieve the bi-directional transmission. Because if multiple transceivers in the same wavelength from fiber 4 transmit signals to the IN fiber transceiver, then this transceiver cannot distinguish the signals. And PON network adopts Time division multiplexing technology, so the transceiver can distinguish the signals from different transceivers.
