Introduction to 1×8 Fiber PLC Splitter
1×8 Fiber PLC Splitter feature low IL& PDL, high isolation suit for 1260nm~1650nm optical fiber signals’ splitter and distributing in PON networks. 1×8 Fiber PLC Splitter with one input and 8 output, It can assembled with 9 units fiber optic connectors as your requirement. 1×8 Fiber PLC Splitter Blockless single mode use the G657A fiber and the max bending radius of the fiber is 15mm. 1×8 Fiber PLC Splitter directly with 0.9mm fiber terminals, tail length according to customer specified.
Toepassingen
- LAN-, WAN- en metronetwerken
- Telecommunicatienetwerken
- Passieve optische netwerken
- FTT(X)-systemen
- CATV
- Module met toegevoegde waarde
1×8 Fiber PLC Splitter Specifications
Configuratietype | 1×8 |
PLC-splittertype | Blokloze PLC-splitter |
Connectortype | SC/APC |
Vezeltype | Enkele modus G657A1 of G652D |
Vezellengte | 1m of 1,5m of Gevraagd |
Pakketstijl | Blokloze stalen buis |
Operationele bandbreedte | 1260 ~ 1650 nm |
Vezeldiameter | 0,9 mm |
Typisch invoegverlies (≤) dB | 10.2 |
Invoegverlies (≤) dB | 10.7 |
Verliesuniformiteit (≤) dB | 0.4 |
Polarisatie-afhankelijk verlies (≤) dB | 0.2 |
Golflengte-afhankelijk verlies (≤) dB | 0.3 |
Retourverlies (≥) dB | 50 |
Directiviteit (≥) dB | 55 |
Temperatuurafhankelijk verlies (≤) dB | 0.5 |
FAQs on 1×8 Fiber PLC Splitter
No, it doesn’t. Our PLC splitters only support single mode application, and the fiber type is G657A1, if you want multimode splitters, please refer to FBT Coupler Splitter.
You can check the below table to see the 1×8 plc splitter loss and simliar 1xn plc splitters
Splitter Ratio | Ideal Loss | Excess Loss (dB, max) | Typical Loss (dB) |
1:2 plc splitter | 3dB | 1dB | 4dB |
1:4 plc splitter | 6dB | 1dB | 7dB |
1:8 plc splitter | 9dB | 2dB | 11dB |
1:16 plc splitter | 12dB | 3dB | 15dB |
1:32 plc splitter | 15dB | 4dB | 19dB |