Introduction to ST to LC Fiber Jumper
ST to LC Fiber Jumper is the fiber optic cable assembled one ST fiber optic connector and one LC fiber optic connector. ST to LC Fiber Jumper possible connect to CATV, optical switch or telecommunication equipment rapidly. ST to LC Fiber Jumper thick layer of protection is used to connect the optical transmitter, receiver and the fiber optic terminal box. ST to LC Fiber Jumper APC Single Mode duplex widely used in the telecom structure projects.
ST to LC Fiber Jumper Specifications
Connectortype | LC to ST |
Poolse soort | APC to PC |
Vezelmodus | OS2 9/125μm |
Invoegverlies | ≤0,3dB |
Terugkeer verlies | ≥60dB |
Golflengte | 1310/1550nm |
Vezelkwaliteit | G.652.D |
Minimale buigradius | 30 mm |
Verzwakking bij 1310 nm | 0,36 dB/km |
Verzwakking bij 1550 nm | 0,22 dB/km |
Vezeltelling | Eenvoudig |
Kabeldiameter | 2,0 mm |
Kabel jas | PVC |
Polariteit | A(Tx) naar B(Rx) |
Bedrijfstemperatuur | -20~70°C |
Bewaar temperatuur | -40~80°C |
FAQs on ST to LC Fiber Jumper
Wat is de maximale trekkracht die kan worden uitgeoefend tijdens de installatie van de standaardkabel?
The max pulling force during the cable installation is 70N.