Introduction to Fiber Optic Splitter 1×2
LGX PLC splitters integrate the splitter with an LGX type module,The strong metal body protects the parts and splitters components inside the closure, while there are pre-teminated adapters on the LGX box to connect to outside equipment.
The LGX PLC splitter is small size and robust as well as flexible to use, it works with single mode optical fibers and with multiple adapters options, thus this product can be used stand alone or with fiber optic patch panels.
Características
- Good channel-to-channel Uniformity
- High Polarization Extinction Ratio
- Low Input Polarization Sensitivity, PDL≤0.2dB
- Perda Dependente de Baixa Polarização
- Operating bandwidth: 1260- 1650nm
Fiber Optic Splitter 1×2 Specifications
| Tipo de configuração | 1×2 |
| Tipo de divisor PLC | LGX Module PLC Splitter |
| Tipo de conector | SC/APC |
| Tipo de fibra | Modo Único G657A1 ou G652D |
| Comprimento da fibra | 1m ou 1,5m ou Solicitado |
| Estilo do pacote | Tubo de aço sem bloqueio |
| Largura de banda operacional | 1260 ~ 1650 nm |
| Diâmetro da fibra | 0,9mm |
| Perda de inserção típica (≤) dB | 3.9 |
| Perda de inserção (≤) dB | 4.2 |
| Uniformidade de perda (≤) dB | 0.4 |
| Perda Dependente de Polarização (≤) dB | 0.2 |
| Perda Dependente do Comprimento de Onda (≤) dB | 0.3 |
| Perda de retorno (≥) dB | 50 |
| Diretividade (≥) dB | 55 |
| Perda Dependente da Temperatura (≤) dB | 0.5 |
FAQs on Fiber Optic Splitter 1×2
Passive Optical Splitters are, quite simply, the components that split the fiber and its signal. A signal from the Aggregation Switch is sent along a run of fiber. When it reaches a Passive Optical Splitter, mirrors and glass in the component split the light into two, or three, or more fiber strands.
The way we define it, a coupler (usually) has four ports, uses no “internal” resistors and has one isolated port that is terminated. A splitter is (usually) a three-port, is non-directional, and requires internal resistors (like a Wilkinson) and has no isolated port.
