Introduction to 1×64 Fiber PLC Splitter
PLC (Planar Lightwave Circuit) Splitters are Single-mode splitters with an even split ratio from one input fiber to multiple output fibers. This 1×64 Fiber PLC Splitter is a 1×64, with 1 input and 64 output fibers with an even split ratio across all fibers regardless of input wavelength. 1×64 Fiber PLC Splitter Cassette Module provides a plug-and-play method for integration in the network, which eliminates any risks during installation. 1×64 Fiber PLC Splitter eliminates the need for splicing machines on the field and there is no need for skilled personnel for deployment. The following figure shows 1×64 Fiber PLC Splitter Cassette Module Splitter applied in the 1U rack chassis in GPON network.
Connectorized PLC Splitters are available with your choice of Fiber Optic Connectors: LC/UPC, LC/APC, SC/UPC, SC/APC, FC/UPC, FC/APC, and ST/UPC.
Formulários
- Redes LAN, WAN e Metro
- Redes de Telecomunicações
- Redes Ópticas Passivas
- Sistemas FTT(X)
- CATV
- Módulo de valor agregado
1×64 Fiber PLC Splitter Specifications
| Tipo de configuração | 1×64 |
| Tipo de divisor PLC | Cassette Module PLC Splitter |
| Tipo de conector | SC/APC |
| Tipo de fibra | Modo Único G657A1 ou G652D |
| Comprimento da fibra | 1m ou 1,5m ou Solicitado |
| Estilo do pacote | Tubo de aço sem bloqueio |
| Largura de banda operacional | 1260 ~ 1650 nm |
| Diâmetro da fibra | 0,9mm |
| Perda de inserção típica (≤) dB | 19.7 |
| Perda de inserção (≤) dB | 21.2 |
| Uniformidade de perda (≤) dB | 2.5 |
| Perda Dependente de Polarização (≤) dB | 0.4 |
| Perda Dependente do Comprimento de Onda (≤) dB | 0.8 |
| Perda de retorno (≥) dB | 50 |
| Diretividade (≥) dB | 55 |
| Perda Dependente da Temperatura (≤) dB | 1 |
FAQs on 1×64 Fiber PLC Splitter
Hi, PLC splitter is generally used in PON network, if you use it in PON network, then it can meet your requirement, but if not, it can not achieve the bi-directional transmission. Because if multiple transceivers in the same wavelength from fiber 4 transmit signals to the IN fiber transceiver, then this transceiver cannot distinguish the signals. And PON network adopts Time division multiplexing technology, so the transceiver can distinguish the signals from different transceivers.
