Introduction to 1×8 PLC Splitter
1×8 PLC Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.
1×8 PLC Splitter ABS Box is most commonly used in the PON networks. 1×8 PLC Splitter provides the complete protection for inner optical components and cable, as well as designed for the convenient and reliable installation, but 1×8 PLC Splitter ABS Box volume is relatively large. 1×8 PLC Splitter mainly used for various connection and distribution products (outdoor fiber distribution box) or network cabinets.
Formulários
- Redes LAN, WAN e Metro
- Redes de Telecomunicações
- Redes Ópticas Passivas
- Sistemas FTT(X)
- CATV
- Módulo de valor agregado
1×8 PLC Splitter Specifications
| Tipo de configuração | 1×8 |
| Tipo de divisor PLC | Divisor PLC de caixa ABS |
| Tipo de conector | SC/APC |
| Tipo de fibra | Modo Único G657A1 ou G652D |
| Comprimento da fibra | 1m ou 1,5m ou Solicitado |
| Estilo do pacote | Tubo de aço sem bloqueio |
| Largura de banda operacional | 1260 ~ 1650 nm |
| Diâmetro da fibra | 0,9mm |
| Perda de inserção típica (≤) dB | 10.2 |
| Perda de inserção (≤) dB | 10.7 |
| Uniformidade de perda (≤) dB | 0.4 |
| Perda Dependente de Polarização (≤) dB | 0.2 |
| Perda Dependente do Comprimento de Onda (≤) dB | 0.3 |
| Perda de retorno (≥) dB | 50 |
| Diretividade (≥) dB | 55 |
| Perda Dependente da Temperatura (≤) dB | 0.5 |
FAQs on 1×8 PLC Splitter
No, it doesn’t. Our PLC splitters only support single mode application, and the fiber type is G657A1, if you want multimode splitters, please refer to FBT Coupler Splitters.
