Introduction to 1×8 Fiber PLC Splitter
1×8 Fiber PLC Splitter feature low IL& PDL, high isolation suit for 1260nm~1650nm optical fiber signals’ splitter and distributing in PON networks. 1×8 Fiber PLC Splitter with one input and 8 output, It can assembled with 9 units fiber optic connectors as your requirement. 1×8 Fiber PLC Splitter Blockless single mode use the G657A fiber and the max bending radius of the fiber is 15mm. 1×8 Fiber PLC Splitter directly with 0.9mm fiber terminals, tail length according to customer specified.
Formulários
- Redes LAN, WAN e Metro
- Redes de Telecomunicações
- Redes Ópticas Passivas
- Sistemas FTT(X)
- CATV
- Módulo de valor agregado
1×8 Fiber PLC Splitter Specifications
| Tipo de configuração | 1×8 |
| Tipo de divisor PLC | Divisor PLC sem bloco |
| Tipo de conector | SC/APC |
| Tipo de fibra | Modo Único G657A1 ou G652D |
| Comprimento da fibra | 1m ou 1,5m ou Solicitado |
| Estilo do pacote | Tubo de aço sem bloqueio |
| Largura de banda operacional | 1260 ~ 1650 nm |
| Diâmetro da fibra | 0,9mm |
| Perda de inserção típica (≤) dB | 10.2 |
| Perda de inserção (≤) dB | 10.7 |
| Uniformidade de perda (≤) dB | 0.4 |
| Perda Dependente de Polarização (≤) dB | 0.2 |
| Perda Dependente do Comprimento de Onda (≤) dB | 0.3 |
| Perda de retorno (≥) dB | 50 |
| Diretividade (≥) dB | 55 |
| Perda Dependente da Temperatura (≤) dB | 0.5 |
FAQs on 1×8 Fiber PLC Splitter
No, it doesn’t. Our PLC splitters only support single mode application, and the fiber type is G657A1, if you want multimode splitters, please refer to FBT Coupler Splitter.
You can check the below table to see the 1×8 plc splitter loss and simliar 1xn plc splitters
| Razão do divisor | Ideal Loss | Perda excessiva (dB, máx.) | Perda típica (dB) |
| 1:2 plc splitter | 3dB | 1dB | 4dB |
| 1:4 plc splitter | 6dB | 1dB | 7dB |
| 1:8 plc splitter | 9dB | 2dB | 11dB |
| 1:16 plc splitter | 12dB | 3dB | 15dB |
| 1:32 plc splitter | 15dB | 4dB | 19dB |
