Introduction to Mode Conditioning Patch Cable LC ST
Mode Conditioning Patch Cable LC ST are designed for use in Gigabit Ethernet 1000BASE-LX applications. Mode Conditioning Patch Cable LC ST are fully compliant with IEEE 802.3z application standards. Mode Conditioning Patch Cable LC ST are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing multimode plants. The need for this patch cord is due to the single-mode launch nature of the -LX or long-wave (1300 nm) transceiver modules used for Gigabit Ethernet. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that confuses the
Mode Conditioning Patch Cable LC ST Specifications
| Tipo de conector | ST to LC |
| Tipo polonês | UPC |
| Modo Fibra | Multimode to Single Mode |
| Perda de inserção | ≤0,3dB |
| Perda de retorno | ≥60dB |
| Comprimento de onda | 850/1300nm to 1310/1550nm |
| Raio mínimo de curvatura | 30mm |
| Contagem de fibras | Simplexo |
| Diâmetro do cabo | 2,0 mm |
| Jaqueta de cabo | PVC |
| Polaridade | A(Tx) para B(Rx) |
| Temperatura de operação | -20~70°C |
| Temperatura de armazenamento | -40~80°C |
FAQs on Mode Conditioning Patch Cable LC ST
No, this patch cable only can be used for indoor. If used outdoors, the cable may be damaged soon, and the loss will also be affected. We recommend the military-grade fiber patch cable for outdoor use.
