Introduction to ST to LC Fiber Jumper
ST to LC Fiber Jumper is the fiber optic cable assembled one ST fiber optic connector and one LC fiber optic connector. ST to LC Fiber Jumper possible connect to CATV, optical switch or telecommunication equipment rapidly. ST to LC Fiber Jumper thick layer of protection is used to connect the optical transmitter, receiver and the fiber optic terminal box. ST to LC Fiber Jumper APC Single Mode duplex widely used in the telecom structure projects.
ST to LC Fiber Jumper Specifications
| Tipo de conector | LC to ST |
| Tipo polonês | APC to PC |
| Modo Fibra | OS2 9/125μm |
| Perda de inserção | ≤0,3dB |
| Perda de retorno | ≥60dB |
| Comprimento de onda | 1310/1550 nm |
| Grau de fibra | G.652.D |
| Raio mínimo de curvatura | 30mm |
| Atenuação em 1310 nm | 0,36dB/km |
| Atenuação em 1550 nm | 0,22dB/km |
| Contagem de fibras | Simplexo |
| Diâmetro do cabo | 2,0 mm |
| Jaqueta de cabo | PVC |
| Polaridade | A(Tx) para B(Rx) |
| Temperatura de operação | -20~70°C |
| Temperatura de armazenamento | -40~80°C |
FAQs on ST to LC Fiber Jumper
What is the max pulling force that can be applied during installation for the standard cable?
The max pulling force during the cable installation is 70N.
