Lar > Produtos > Cabos de fibra óptica > ST to LC Fiber Jumper APC Single Mode Duplex

ST to LC Fiber Jumper APC Single Mode Duplex

PAT-LC-ST-APC-SM-DX
  • Prazo de entrega: 3 dias úteis
  • Amostra grátis em estoque
  • Garantia de 540 dias · Devoluções em 30 dias
  • Suporte técnico

Introduction to ST to LC Fiber Jumper

ST to LC Fiber Jumper is the fiber optic cable assembled one ST fiber optic connector and one LC fiber optic connector. ST to LC Fiber Jumper possible connect to CATV, optical switch or telecommunication equipment rapidly. ST to LC Fiber Jumper thick layer of protection is used to connect the optical transmitter, receiver and the fiber optic terminal box. ST to LC Fiber Jumper APC Single Mode duplex widely used in the telecom structure projects.

ST to LC Fiber Jumper Specifications

Tipo de conectorLC to ST
Tipo polonêsAPC to PC
Modo FibraOS2 9/125μm
Perda de inserção≤0,3dB
Perda de retorno≥60dB
Comprimento de onda1310/1550 nm
Grau de fibraG.652.D
Raio mínimo de curvatura30mm
Atenuação em 1310 nm0,36dB/km
Atenuação em 1550 nm0,22dB/km
Contagem de fibrasSimplexo
Diâmetro do cabo2,0 mm
Jaqueta de caboPVC
PolaridadeA(Tx) para B(Rx)
Temperatura de operação-20~70°C
Temperatura de armazenamento-40~80°C

FAQs on ST to LC Fiber Jumper

What is the max pulling force that can be applied during installation for the standard cable?

The max pulling force during the cable installation is 70N.

Obtenha um orçamento instantâneo