ADSS Tension clamp aluminum body, PA-1000(8-11mm)

APPLICATION

These clamps will be used as cable dead-end at end poles (using one clamp).Two clamps can be installed as double dead-end in the following cases :at jointing poles
at intermediate angle poles when the cable route deviates by more than 20°.
at intermediate poles when the two spans are different in lengths
at intermediate poles on hilly landscapes

คุณสมบัติหลัก:

• Opening bail and unlosable easy to be installed.
• Good resistance to the cable oscillations thanks to the flexible stainless steel 
bail.
• Maximum strength load up to 10kn according to the cable used, climatic conditions and installation parameters. 

• Self-adjustable wedge.
• Aluminum alloy, High strength PA66, stainless steel bail.
• Long service life.
• Competitive tension clamp price.
• Fast produce.
• Stainless steel bail length is adjustable.
• Dead end clamp with corrosion resistance.
• For span 100M Max.
• LV-ABC cable can use also.

These anchoring clamps are made of an opened Aluminum body, a pair of plastic wedges and a flexible bail equipped with an insulating thimble. The bail can be locked onto the clamp body once passed through the pole bracket and re-opened by hand at any time when the clamp is not under full load. All parts are secured together to prevent any loss during installation. 

 Aerial networks are subject to repetitive climatic stress during several decades. The optical cable and its accessories, in particular the anchoring and suspension clamps, constitute an interdependent component of the complete system that must withstand during its all live time to the various loads induced by wind pressure, ice sleeve weight, Aeolian vibrations, temperature variations, and be resistant to corrosion, UV radiation.

The choice of accessories duly compatible with the cable and the use made of it is essential for a quick and safe installation, to facilitate the operation and ensure a long-term reliability of the network.