Introduction to SC APC Optical Attenuator
SC APC Optical Attenuator Female to Male is reduce the optical fiber power by a certain level within SC ports of fiber optic network. SC Fiber Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements. This may occur because of a mismatch between the transmitters/receivers (transceivers, media converters), or because the media converters are designed for a much longer distance than for which they are being used. Sometimes attenuators are also used for stress testing a network link by incrementally reducing the signal strength (increasing the dB attenuation) until the optical link fails, thus determining the signal’s existing safety margin.
SC APC Optical Attenuator Specification
| ขั้วต่อไฟเบอร์ | เซาท์แคโรไลนา/เอพีซี |
| Connector Gender | Fixed Male to Female |
| Ferrule Type | Zirconia Ceramic |
| Transfer Mode | โหมดเดี่ยว |
| Attenuation | 1dB |
| Operating Wavelength(nm) | 1260~1620(SM) |
| Attenuation Accuracy | ±0.5dB |
| การสูญเสียผลตอบแทน | ≥45dB |
| Polarization Dependent Loss | ≤0.2dB |
| Max Optical Input Power | 200mW |
| Humidity | 95%RH |
| Operating Temperature Range | -40~80°ซ |
| Storage Temperature Range | -40~85°C |
FAQs on SC APC Optical Attenuator
Yes, our SC APC Optical Attenuator Female to Male can be customized by customers for different attenuation for the fiber optic equipment.
