Introduction to PLC Splitter 1×12
The planar optical wave circuit (PLC) splitter is an optical power management device made of silicon optical waveguide technology, which distributes optical signals from the central office (CO) to multiple locations.
Bare fiber splitter is an ODN product suitable for PON network. It can be installed in the pigtail box, test instrument and WDM system to minimize the space occupation. Optical fiber protection is relatively fragile, so it is necessary to carry out a complete protection design in the bearing box and equipment to protect the splitter.
Features
- Channel: 1×12
- Cable length: customized
- Fiber type: G657A1 or as customized
- Small Size
- Package: PP bag or blister package
- Low PDL Compact Design
- Good channel-to-channel uniformity
- Wide Operating Temperature: from -40℃ to 85℃
PLC Splitter 1×12 Specifications
| Configuration Type | 1×12 |
| PLC Splitter Type | Bare Fiber Blockless PLC Splitter |
| Connector Type | None |
| Fiber Type | Single Mode G657A1 or G652D |
| Fiber Length | 1m or 1.5m or Requested |
| Package Style | Blockless Steel Tube |
| Operating Bandwidth | 1260~1650nm |
| Fiber Diameter | 0.9mm |
| Typical Insertion Loss (≤) dB | 12.1 |
| Insertion Loss (≤) dB | 13.2 |
| Loss Uniformity (≤) dB | 1.8 |
| Polarization Dependent Loss (≤) dB | 0.4 |
| Wavelength Dependent Loss (≤) dB | 0.6 |
| Return Loss (≥) dB | 50 |
| Directivity (≥) dB | 55 |
| Temperature Dependent Loss (≤) dB | 0.8 |
FAQs on PLC Splitter 1×12
Bare fiber-All ends are bare fibers (0.9/2.0/3.0µm), easy to be spliced.Requires the least space during cabling;the Blockless splitter is Resembles bare fiber PLC splitter, but has fiber optic connectors.Uses stainless tube package for the PLC splitter chip.
Most people will choose to have a cable or internet company come out to install a splitter.
