Introduction to 1×16 PLC Splitter
The planar optical wave circuit (PLC) splitter is an optical power management device made of silicon optical waveguide technology, which distributes optical signals from the central office (CO) to multiple locations.
PLC splitter 1×16 is an ODN product suitable for PON network. It can be installed in the pigtail box, test instrument and WDM system to minimize the space occupation. Optical fiber protection is relatively fragile, so it is necessary to carry out a complete protection design in the bearing box and equipment to protect the splitter.
Features
- Channel: PLC splitter 1×16
- Cable length: Customized
- Fiber type: G657A1 or as customized
- Small Size
- Package: PP bag or blister package
- Low PDL Compact Design
- Good channel-to-channel uniformity
- Wide Operating Temperature: from -40℃ to 85℃
1×16 PLC Splitter Specification
| Configuration Type | 1×16 |
| PLC Splitter Type | Cassette Module |
| Connector Type | SC/UPC |
| Fiber Type | Singlemode G657A1 or G652D |
| Fiber Length | 1m or 1.5m or Requested |
| Package Style | Blockless Steel Tube |
| Operating Bandwidth | 1260~1650nm |
| Fiber Diameter | 0.9mm |
| Typical Insertion Loss (≤) dB | 13.2 |
| Insertion Loss (≤) dB | 13.7 |
| Loss Uniformity (≤) dB | 1.2 |
| Polarization Dependent Loss (≤) dB | 0.3 |
| Wavelength Dependent Loss (≤) dB | 0.5 |
| Return Loss (≥) dB | 50 |
| Directivity (≥) dB | 55 |
| Temperature Dependent Loss (≤) dB | 0.8 |
FAQs on PLC Splitter 1×6
Can the fiber diameter of this product be customized to 125μm?
No, 125μm fiber diameter is too thin, it is easy to break and cannot protect the fiber.
