Introduction to 1×8 Fiber PLC Splitter
1×8 Fiber PLC Splitter feature low IL& PDL, high isolation suit for 1260nm~1650nm optical fiber signals’ splitter and distributing in PON networks. 1×8 Fiber PLC Splitter with one input and 8 output, It can assembled with 9 units fiber optic connectors as your requirement. 1×8 Fiber PLC Splitter Blockless single mode use the G657A fiber and the max bending radius of the fiber is 15mm. 1×8 Fiber PLC Splitter directly with 0.9mm fiber terminals, tail length according to customer specified.
Applications
- LAN, WAN & Metro Networks
- Telecommunication Networks
- Passive Optical Networks
- FTT(X) Systems
- CATV
- Value Added Module
1×8 Fiber PLC Splitter Specifications
| Configuration Type | 1×8 |
| PLC Splitter Type | Blockless PLC Splitter |
| Connector Type | SC/APC |
| Fiber Type | Single Mode G657A1 or G652D |
| Fiber Length | 1m or 1.5m or Requested |
| Package Style | Blockless Steel Tube |
| Operating Bandwidth | 1260~1650nm |
| Fiber Diameter | 0.9mm |
| Typical Insertion Loss (≤) dB | 10.2 |
| Insertion Loss (≤) dB | 10.7 |
| Loss Uniformity (≤) dB | 0.4 |
| Polarization Dependent Loss (≤) dB | 0.2 |
| Wavelength Dependent Loss (≤) dB | 0.3 |
| Return Loss (≥) dB | 50 |
| Directivity (≥) dB | 55 |
| Temperature Dependent Loss (≤) dB | 0.5 |
FAQs on 1×8 Fiber PLC Splitter
No, it doesn’t. Our PLC splitters only support single mode application, and the fiber type is G657A1, if you want multimode splitters, please refer to FBT Coupler Splitter.
You can check the below table to see the 1×8 plc splitter loss and simliar 1xn plc splitters
| Splitter Ratio | Ideal Loss | Excess Loss (dB, max) | Typical Loss (dB) |
| 1:2 plc splitter | 3dB | 1dB | 4dB |
| 1:4 plc splitter | 6dB | 1dB | 7dB |
| 1:8 plc splitter | 9dB | 2dB | 11dB |
| 1:16 plc splitter | 12dB | 3dB | 15dB |
| 1:32 plc splitter | 15dB | 4dB | 19dB |
