Introduction to SC to ST Cable
These SC to ST Cable including single mode and multimode types, in simplex and duplex versions. The SC connector of the SC to ST Cable is a high precision SC fiber optic connector. SC is low cost but high performance, which makes SC to ST Cable one of the most popular cables. Our SC to ST Fiber Cable allow for new VCSEL based hardware and old legacy LED based hardware to co-exist over your system.
FiberCheap’s SC to ST Optic Cable are all tested for 100% functionality and guaranteed compatible for outstanding network performance. We offer SC to ST Optical Cable up to 50 Meters. This particular SC to ST Fiber Cable is a SC to ST Fiber Cable Single Mode Duplex UPC G657A LSZH.
SC to ST Cable Specification
| Connector Type | ST to SC |
| Polish Type | UPC |
| Fiber Mode | OS2 9/125μm |
| Insertion Loss | ≤0.3dB |
| Return Loss | ≥60dB |
| Wavelength | 1310/1550nm |
| Fiber Grade | G.652.D |
| Minimum Bend Radius | 30mm |
| Attenuation at 1310 nm | 0.36 dB/km |
| Attenuation at 1550 nm | 0.22 dB/km |
| Fiber Count | Duplex |
| Cable Diameter | 2.0mm |
| Cable Jacket | PVC |
| Polarity | A(Tx) to B(Rx) |
| Operating Temperature | -20~70°C |
| Storage Temperature | -40~80°C |
FAQs on SC to ST Cable
SC to ST Cable works through carrying communication signals using pulses of light generated by small lasers orlight-emitting diodes (LEDs). The SC to ST Cable consists of one or more strands, similar in size to a human hair. The centre of each strand is called the core, this core is the pathway for light to travel. The core is surrounded by a layer of glass that reflects light inward to avoid loss of signal and allows the light to pass through bends in the SC to ST Cable.
